Mobil 1™ Formula 0W-40
Advanced Full Synthetic Motor Oil
Mobil 1™ Formula 0W-40 Advanced Full Synthetic Motor Oil is engineered for the latest gasoline and diesel (without Diesel Particulate Filters or DPFs) engine technology delivering excellent all-round performance. It provides exceptional cleaning power, wear protection and overall performance.
Features and Benefits
Mobil 1 Formula 0W-40 is engineered with a proprietary blend of ultra-high performance synthetic basestocks fortified with a precisely balanced component additive system.
|
Features |
Advantages and Potential Benefits |
|
Broad application |
Meets or exceeds many OEM and industry approvals |
|
Advanced full synthetic formulation |
Excellent overall lubrication and wear protection |
|
Excellent low temperature capabilities |
Rapid engine protection at start-up to reduce engine wear. |
|
Active cleaning agents |
Help keep your engine run clean |
|
Outstanding high temperature thermal and oxidative stability |
Resists oil breakdown to provide long lasting protection |
Applications
Mobil 1 Formula 0W-40 is recommended for many types of modern vehicles where it will help provide unsurpassed performance under very demanding driving conditions, including:
• Latest engine technologies including Turbo-chargers, Direct Injection, Diesels and Hybrids
• High Performance Engines
• Helps to extend Oil Drain
• Nearly all operating conditions, from mild to extreme
Most operating conditions, from mild to extreme
Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
|
According to ExxonMobil, this product is of the following quality level: |
|
API CF |
|
This product has the following builder approvals: |
|
MB 229.3 |
|
MB 229.5 |
|
This product meets or exceeds the requirements of: |
|
API SN |
|
API SM |
|
API SL |
|
API SJ |
|
ACEA A3/B3 |
|
ACEA A3/B4 |
|
FIAT FIAT 9.55535-M2 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-40 |
|
Ash, Sulfated, mass%, ASTM D874 |
1.3 |
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.8490 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
230 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.8 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.5 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
75 |
|
Pour Point, °C, ASTM D97 |
-48 |
|
Viscosity Index, ASTM D2270 |
185 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx